Perspectives on railway track geometry condition monitoring from in-service railway vehicles

This paper presents a view of the current state of monitoring track geometry condition from in-service vehicles. It considers technology used to provide condition monitoring; some issues of processing and the determination of location; how things have evolved over the past decade; and what is being, or could/should be done in future research. Monitoring railway track geometry from an in-service vehicle is an attractive proposition that has become a reality in the past decade. However, this is only the beginning. Seeing the same track over and over again provides an opportunity for observing track geometry degradation that can potentially be used to inform maintenance decisions. Furthermore, it is possible to extend the use of track condition information to identify if maintenance is effective, and to monitor the degradation of individual faults such as dipped joints. There are full unattended track geometry measurement systems running on in-service vehicles in the UK and elsewhere around the world, feeding their geometry measurements into large databases. These data can be retrieved, but little is currently done with the data other than the generation of reports of track geometry that exceeds predefined thresholds. There are examples of simpler systems that measure some track geometry parameters more or less directly and accurately, but forego parameters such as gauge. Additionally, there are experimental systems that use mathematics and models to infer track geometry using data from sensors placed on an in-service vehicle. Finally, there are systems that do not claim to measure track geometry, but monitor some other quantity such as ride quality or bogie acceleration to infer poor track geometry without explicitly measuring it.     

EEMD和SVM在发动机故障诊断中的应用

针对发动机缸盖振动信号的非线性非平稳特征,提出一种总体平均经验模态分解(EEMD)和支持向量机相结合的信号分析及故障诊断方法,该方法利用EEMD算法以及IMF序列和原始振动信号之间的相关系数,有效放大故障诊断特征向量的差异。对原始振动信号进行EEMD分解,得到各阶特征模态函数(IMF),求各阶IMF分量对应于原始信号的相关系数并组成故障分类特征向量。分别将IMF相关系数法和IMF能量分布法得到的特征向量作为输入,建立BP神经网络和支持向量机,判断发动机工作状态和故障类型。分析表明,对IMF求相关系数的方法简便易行,能有效放大不同工况下特征向量的差异,结合支持向量机能够对既定机型的配气机构和点火系常见故障进行准确识别。     

大连市主城区停车分区供给策略研究

随着大连机动车保有量快速增长,城区规模不断扩大,主城区内停车问题逐渐凸显,且呈现出区域差别化的特点.在总结其他城市经验的基础上,结合大连城市发展现状及规划,划定停车分区,提出各分区停车设施供给策略,为大连城市未来停车系统的发展提供参考.     

海工中压电力系统接地方式的选择与设计

对电力系统几种常用的接地方式进行分析比较,得出海工中压电力系统最适合中性点经高电阻接地的结论。在介绍分析高电阻接地的主要连接方式和接地故障电流电路模型的基础上,阐述接地设备参数选取的计算方法与原则。并结合实例,演示了单相接地故障电流和接地电阻/变压器参数计算及接地保护装置参数设定的全过程,为大型海洋工程和船舶中压系统接地方案的选择、系统设计和实际应用提供了较为全面的理论依据和有益参考。     

A Fuzzy Fault Diagnosis Method for Large Radar Based on Directed Graph Model

To meet the requirement of the real-time, accuracy and multi-target diagnosis of the large radar system,a new fuzzy fault diagnosis method based on directed graph model is proposed in this paper. In this method, the large complex system model is defined using the directed graph model firstly, in which the nodes observing the fault by the hierarchical reconstruction of the directed graph are located, then the fault dependency matrix between these nodes and the fault sources are established. And then, we utilize the sensors’ alarm probabilities under different situations to build the characteristic fault observation matrix in the fault observation space. Finally,the optimized corresponding diagnosis method using a fuzzy function, which describes the similarity between the actual observation vector and the fault’s characteristic vector, is designed. The experimental results demonstrate that the proposed method can achieve high diagnosis efficiency and accuracy. It can be widely used in the real radar system.     

基于动视觉特性的高速公路景观敏感区划分

分析了驾驶人动视觉特性,研究了驾驶人的水平视野角度、前景视图、注意力集中点与最深视野随着车速的变化规律,构建了基于驾驶人动视觉特性的高速公路景观敏感区模型,并推导了景观敏感区函数。运用景观敏感区模型计算了双向四车道高速公路在不同限速条件下的景观敏感区尺度,运用景观敏感区函数获得分级结果,并阐述了不同景观敏感区的属性与景观要素设计要点。通过对比试验,研究了边坡宽度与一级景观敏感区尺度之间的关系。研究结果表明:双向四车道高速公路景观敏感区尺度为545m,一~三级敏感区尺度分别为55、260、230m,其中一级景观敏感区属于最敏感区域;进行边坡景观设计时可通过修正坡度的方法改变边坡宽度占高速公路景观敏感区的比重,坡度越缓,景观敏感性越高。     

基于T-S模糊模型的船舶推进系统故障诊断研究

基于船舶推进系统基准(SPSB)测试平台,建立了船舶推进控制系统的T-S模糊模型,结合满意控制理论,通过模糊化与反模糊化将船舶推进系统分成多个局部子系统,给出了各局部子系统在执行器恒偏差故障下,满足多个性能指标约束的故障诊断观测器设计方法。利用Simulink工具箱建立了仿真模型,验证了船舶推进控制系统多性能指标约束下故障诊断观测器的正确性与有效性,为船舶推进系统的故障诊断提供了新的思路。     

可监测性设计理论在船舶动力机械系统设计中的应用

船舶动力机械系统一旦出现故障直接威胁船舶安全,但是船舶服役后难以增加设备完善动力机械运行状态的监测。为此,提出了可监测性设计理论内涵,在常规船舶设计建造阶段考虑动力机械系统的可监测性,从而构建出可监测性设计理论在船舶动力机械系统设计中的工程应用框架。以远洋救助船动力机械系统为例,分析了可监测性设计理论在机械系统设计中的具体应用。实践证明,可监测性设计理论在船舶动力机械系统中的工程化实施增强了其可监测性,大大提高了自身状态监测和故障诊断能力水平,并且为船舶动力机械创新设计和机械系统的可再制造提供了保障和技术支撑。     

可调螺距螺旋桨装置典型故障的分析与处理

通过对可调螺距螺旋桨装置几个典型故障现象的分析,阐述了产生上述故障的机理和相应的处理措施,针对性的提出了优化、改进建议。     

智能压路机故障诊断系统的实现

为了实现对压路机的状态监控、故障预防及诊断,建立了神经网络与专家系统相结合的智能压路机故障诊断系统．实现了对智能压路机常见故障的诊断。从系统最终运行结果来看,该智能压路机故障诊断系统基本实现了所需功能